2003 Ski-Doo REV Series Factory Shop Manual, Page 263Get this manual
Section 08 STEERINGFRONT SUSPENSION Subsection 02 (STEERING SYSTEM)
Reinstall windshield assembly to handlebarRefer to WINDSHIELD ADJUSTMENT below
Move handlebar to the desired positionTorque all bolts no4 to 25 Nm (18 lbfft)1
A33H04A
A33G0GA
ONE SIDE SHOWN FORWARD POSITION 1Bolts retaining windshield assembly
Readjust throttle lever housing no21 and switch housing accordingly to optimal angle so that you will not need to release your grip to operate levers
1Torque to 25 Nm (18 lbfft) AEqual gap all around
WARNING
Adjust with vehicle at rest in safe placeSecurely retighten all fastenersNever rotate throttle lever to operate with fingers instead of thumb
CAUTION: Tighten the bolts equally in crisscross sequence and ensure there is an equal gap on each side of the clamps