2003 Ski-Doo REV Series Factory Shop Manual, Page 231Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
360 REV IGNITION AND ELECTRICAL SYSTEM TESTING PART RER switch (without battery) Start RER switch (All) TEST TO BE PERFORMED RER signal at MPEM Continuity from StartRER switch to MPEM Voltage supply from regulator Current to battery WIRE COLOR RESISTANCE MULTIMETER PROBE MULTIMETER VALUE CONNECTION SCALE (ohms) 11-DA-7-F 11-DA-3-F 12-HG-8-M 11-DA-7-F 00.0 or auto range VOLTAGE MULTIMETER SCALE 00.0 Vdc VALUE (volts) 11 to 13 00.0 Vdc NOTE When RER button is activated when engine is running Engine 5000 RPM with fully charged batteryWith 30 fuse removed and Ammeter in seriesDo the test between and B, and and and using manual starterThe term engine refers to the metal parts connected to the magneto housingEngine Idling (1500 to 1800 RPM) Engine Idling (1500 to 1800 RPM) Engine Idling (1500 to 1800 RPM) Engine Idling (1500 to 1800 RPM)
BE and BK
BE and BE
Above battery voltage below 15 volts 10 Scale
RDBU and 5-RR-87-F and negative batte negative battery ry terminal terminal RD and RDWH YL and YL and GN YL and engine WHGN and BK RDWH and RDBR WHGN and BK RDBU and RDBR 6-FA-A-F 6-FA-B-F 2-MO-(1,2,3)-F 2-MO-(1,2,3)-F and engine 5-RC-85-F 5-RC-86-F 5-RC-87-F 5-RC-30-F 5-RC-85-F 5-RC-86-F 5-RC-87-F 5-RC-30-F