2003 Ski-Doo REV Series Factory Shop Manual, Page 230Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
360 REV IGNITION AND ELECTRICAL SYSTEM TESTING
360 REV IGNITION AND ELECTRICAL SYSTEM TESTING PART TEST TO BE PERFORMED WIRE COLOR RESISTANCE MULTIMETER PROBE MULTIMETER VALUE CONNECTION SCALE (ohms) 11-DA-3-F 11-DA-6-F 11-DB-3-F 11-DA-6-F 11-DA-4-F 11-DA-5-F 11-DA-4-F 11-DA-5-F 00.0 or auto range 00.0 or auto range 00.0 or auto range 00.0 or auto range 00.0 or auto range 0.L 00.0 to 00.5 0.L 00.0 to 00.5 VOLTAGE MULTIMETER SCALE VALUE (volts) NOTE Engine stop switches must be in run PositionEngine stop switches must be in stop PositionTether cap must be removedTether cap must be in place
Running insulation BK and BKYL Engine stop switches Continuity in stop BK and BKYL position DESS switch Insulation with DESS removed Continuity with DESS in run position Ground connection BKWH and BKGN BKWH and BKGN BK and negative battery terminal or body
00.0 to 00.5
MPEM power (with battery) MPEM power (without battery) Trigger coil no1 Trigger coil no2 (RER only) MPEM output voltage