2003 Ski-Doo REV Series Factory Shop Manual, Page 228Get this manual

2003 Ski-Doo REV Series Factory Shop Manual, Page 228

Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
3Activate the manual starter and check values indicated by the multimeter4Repeat operation times5Compare readings with those appearing in the IGNITION table
7HIGH VOLTAGE COIL TESTING
Resistance Testing
1Unplug housing between high tension coil and MPEM2Connect multimeter probes to WHITEBLUE and BLACK wires and measure resistanceA32E11A

1MAG side spark plug cable 2Connected to ground

4Activate the manual starter and check values indicated by the multimeter5Repeat operation times6Compare readings with those appearing in the IGNITION table

Back to 2003 Ski-Doo REV Series Factory Shop Manual