2003 Ski-Doo REV Series Factory Shop Manual, Page 214Get this manual
Section 06 ELECTRICAL Subsection 04 (BATTERY)
If you need an accurate ammeter, we recommend the use of: SHURITE 5202 (0 to A) or 5203 (0 to A) available from electronic parts supply shopsCABLE TERMINAL INSTALLATION
Carefully strip the wire approximately to 10 mm (12 in) in length, using wire stripping tool or sharp bladeknife
A00E0DA
A32E2QA
Charger Rheostat 12 50 Ammeter Battery
For service application and permanent installation, both ammeter and rheostat can be built into small box adjacent to your chargerCAUTION: Adequate ventilation MUST be provided to cool the rheostat
NOTE: Make sure not to cut wire strands while stripping the wireInstall the appropriate terminal on the wire according to the requirementRefer to appropriate parts catalog