2003 Ski-Doo REV Series Factory Shop Manual, Page 117Get this manual
Section 04 ENGINE Subsection 02 (593 HO AND 793 ENGINE TYPES)
With the syringe, fill the outer ball bearing and inner side of outer seal with 40 to 45 mL of Isoflex grease
At crankshaft installation, position drive pins as illustrated
A32C1CA
TYPICAL 1Position pins
Pour 50 mL (2 U.Soz) of injection oil in the pan under central gear to lubricate pump gearing as per photoA33C16A
BALLS COATED WITH SEAM OF GREASE
A32C0DA