2003 Ski-Doo REV Series Factory Shop Manual, Page 57Get this manual
Section 02 MAINTENANCE Subsection 03 (STORAGE)
ENGINE LUBRICATION
Engine internal parts must be lubricated to protect them from possible rust formation during the storage periodProceed as follows: Start the engine and allow it to run at idle speed until the engine reaches its operating temperature
COUNTERSHAFT LUBRICATION
Lubricate with anti-seize lubricant (PN 293 800 070) the countershaft mounting surfaces of driven pulley and brake discCAUTION: Do not lubricate excessively as lubricant could contact and soil brake pads and or drive belt
WARNING
Ensure the track is free of particles which could be thrown out while it is rotatingKeep hands, tools, feet and clothing clear of trackEnsure no one is standing in close proximity to the vehicleStop the engineRemove air silencer to spray storage oil into each carburetor boreRestart engine and run at idle speedInject storage oil until the engine stalls or until sufficient quantity of oil has entered the engine (approximately half can)With the engine stopped, remove the spark plug and spray storage oil (PN 496 014 100) into each cylinderCrank slowly or revolutions to lubricate cylindersReinstall the spark plugs and air silencer