2002 Ski-Doo Shop Manual Volume Two, Page 242Get this manual
Section 09 BODYFRAME Subsection 02 (BODY)
Taillight
If the taillight bulb is burnt, expose the bulb by removing red plastic lensTo remove, unscrew the retaining screwsVerify all lights after replacement
All Models Remove hinge pin push nuts
To remove decal; heat old decal with heat gun and peel off slowlyUsing isopropyl alcohol, clean the surface and dry thoroughlyApply liquid soap to new decal and carefully position the decalUsing sponge or squeegee, remove the air bubbles and surplus water working from the center toward the edgesAllow to air dryCAUTION: Do not apply isopropyl alcohol or solvent directly on decalsUse only in well ventilated area
A30H17A
Unplug wiring harnesses then retaining cablesRemove hinge pins, cables, spring and hood