2002 Ski-Doo Shop Manual Volume Two, Page 222Get this manual
Section 07 REAR SUSPENSION Subsection 04 (TRACK)
Alignment WARNING
Before checking track tension, ensure that the track is free of all particles which could be thrown out while it is rotatingKeep hands, tools, feet and clothing clear of trackEnsure no one is standing in close proximity to the vehicleAll Models With rear of vehicle supported off the ground, start engine and allow the track to rotate slowlyCheck that the track is well centered; equal distance on both sides between edges of track guides and slider shoes1 2
TYPICAL 1Line
NOTE: Lightly oil track tension gauge center pin to avoid stickingAll Models Refer to TECHNICAL DATA for proper tension valuesCAUTION: Too much tension will result in excessive stress on suspension componentsIf too loose, the track will have tendency to thumpTo adjust, loosen the rear idler wheel retaining screws then loosen or tighten the adjuster bolts located on the inner side of the rear idler wheels