2002 Ski-Doo Shop Manual Volume Two, Page 205Get this manual
Section 06 ELECTRICAL Subsection 04 (TESTING PROCEDURE)
TEST TO BE PERFORMED Running insulation Continuity in stop position Insulation in stop position
WIRE COLOR BK and BKYL BK and BKYL BKGN and BKWH BKGN and BKWH WH and RD WH and BKRD BK and RD BK and engine WHYL and BLYL GYYL and GNYL WHBL and BK WHBL and BK Spark plug cap and engine BK and engine BK and engine
MULTIMETER PROBE CONNECTION
Ignition and kill switches
IGNITION SYSTEM TESTING (CK3 SERIES 290 RER) RESISTANCE VOLTAGE NOTE VALUE MULTIMETER VALUE MULTIMETER (OHMS) SCALE (VOLTS) SCALE 6-DB-2-F 00.0 0.L No stop switch must be in run position6-DA-3-F 6-DB-2-F Only one stop switch must be in run po00.0 00.000.5 6-DA-3-F sitionTest one at time0.L 00.000.5 25.056.0 3.58.1 0.L 00.000.5 190300 190300 00.200.5 times 10.519 times 00.0 00.0 00.0 00.0 00.0 00.0 00.0 00.0 00.0 30.050.0 4.010.0 .200.350 .200.350 10.020.0 times 00.0Vac 00.0Vac .000Vac .000Vac 00.0Vac Tether cord cap should be offTether cord cap should be in place The term "engine" refers to the engine metal parts connected to the magneto housing No switch must be in run position and tether cord cap must be in place