2002 Ski-Doo Shop Manual Volume Two, Page 199Get this manual
Section 06 ELECTRICAL Subsection 04 (TESTING PROCEDURE)
Check for proper calibration numberSee table belowSelect NO and press ENTERPress MENU twice then turn off programmer, unplug it from MPEMRemove 9-volt adaptorStop engine when using With Engine Running procedureMODEL Mach SPORT CALIBRATION PROGRAM NUMBER (software) MPEM NP (hardware) CALIBRATED MPEM NP (hardware and software) 515 175 431 Mach TECH PLUS 512 059 293
Simultaneously with the following operation transfer will occurAt this point, be ready to rev the engine so it won't fall below the 2000 RPM mark when not using bypass wire or 9-volt adaptorPlug-in the desired calibration cartridge (special red key) onto the programmer post, the following screens will appear temporarily: