2002 Ski-Doo Shop Manual Volume Two, Page 129Get this manual
Section 04 ENGINE Subsection 05 (OIL INJECTION SYSTEM)
ASSEMBLY
2, Oil Pump Gear
At gear assembly, apply light coat of low temperature grease (PN 413 706 100) on gear teeth
ADJUSTMENT
Prior to adjusting the pump, make sure all carburetor adjustments are completed
Synchronizing Pump with Carburetor
Eliminate the throttle cable free-play by pressing the throttle lever until light resistance is felt, then hold in placeThe aligning marks on the pump casting and on the lever must alignIf not, loosen the adjuster nut and adjust accordinglyRetighten the adjuster nut