2002 Ski-Doo Shop Manual Volume Three, Page 305Get this manual
Section 07 REAR SUSPENSION Subsection 02 (SC-10 SUSPENSION)
12, Front Shock
All Models Unfasten one end of stopper strap(s)Unbolt shock and remove it
6,7, Self-Locking Screws
CAUTION: These self-locking screws must always be replaced by new ones every time they are removedNOTE: To prevent axle from turning when unscrewing self-locking screws, proceed as follows: Remove one self-locking screw then install 10 mm shorter non-self-locking one in placeTorque as specified in exploded view Remove the opposite self-locking screw Remove the temporary installed non-self-locking screw If it doesn't work, heat screw head to melt threadlockerLift rear of vehicle at least (3 ft)
2, Rear Spring
All Models Remove spring ends from adjusting camsUnbolt rear arm top axle from chassisAll Liquid Cooled Models Unscrew set screws from locking ring at each end of top axleRemove spacers and top idler wheelsRemove springs