2002 Ski-Doo Shop Manual Volume Three, Page 292Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
LIGHTING SYSTEM TESTING (ZX SERIES 360 W) PART TEST TO BE PERFORMED WIRE COLOR YL and YL and GN YL and engine Engine frame BK and negative battery terminal RDBU and negative battery terminal RDBR and negative battery terminal MULTIMETER PROBE CONNECTION 2-MO-(A,B,C)-F and 2-MO-(A,B,C)-F 2-MO-(B,C)-F and engine Engine and Frame 5-RR-86-F and negative battery terminal 5-RR-87-F and negative battery terminal 5-RR-30-F and negative battery terminal 5-RR-85-F and negative battery terminal 5-RR-85-M and 5-RR-86-M 5-RR-86-F and negative battery terminal 5-RC-85-F and negative battery terminal 5-RC-87-F and negative battery terminal 5-RC-30-F and negative battery terminal 5-RC-85-M and 5-RC-86-M AMP probe on negative battery cable RESISTANCE VALUE (OHMS) 00.000.5 times 0.L 00.000.5 00.000.5 MULTIMETER SCALE 00.0 or auto range 00.0 or auto range 00.0 or auto range 00.0 or auto range VOLTAGE VALUE (VOLTS) 3.55.5 times Above battery voltage below 15 volts Above battery voltage below 15 volts Above battery voltage below 15 volts MULTIMETER SCALE 00.0Vac NOTE Do the test between and B, and and and using manual starterThe term "engine" refers to the engine metal parts connected to the magneto housingRelay connectedBackprobe terminal