2002 Ski-Doo Shop Manual Volume Three, Page 285Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
6MPEM VOLTAGE TESTING
Liquid Cooled Models Only 1Disconnect the housing between module and high voltage coil2Connect multimeter probes to WHITEBLUE and BLACK wires coming out from modulePlacethe selector switch to and the scale to 00.0Vac
A32E12A
3Compare readings with those appearing in the IGNITION table
Voltage Testing
1Disconnect spark plug cap from spark plug2Fasten alligator clip to spark plug cable, near the spark plug3Connect other multimeter wire to engine (ground),then place selector switch to and scale to 0.00Vac1 2
A32E0ZA
TYPICAL