2002 Ski-Doo Shop Manual Volume Three, Page 237Get this manual
Section 05 TRANSMISSION Subsection 06 (BRAKE)
5,12, Brake Cable and Nut
Insert brake cable into upper hole in brake lever and caliperInstall nut and tighten until few threads exceed
Should this adjustment be unattainable, retighten nut no12 as neededModels with Hydraulic Brake Change brake fluid once yearBleed brake system as follows: Keep sufficient DOT brake fluid in reservoir at all timesCAUTION: Use only DOT brake fluidInstall hose on left side bleederRoute this hose to containerOpen bleederPump brake lever until no air escapes from hoseClose bleederProceed the same way with the right side bleederWARNING
At least threads must exceed the elastic stop nut
10, Upper Clamp
Install upper clamp with its arrow pointing at front of vehicleTighten to Nm (71 lbfin) front screw before rear one2 1
A06D0JA
A03D3QB
TYPICAL 1Open bleeder 2Clear hose to catch used brake fluid