2002 Ski-Doo Shop Manual Volume Three, Page 217Get this manual
Section 05 TRANSMISSION Subsection 04 (DRIVEN PULLEY)
DISASSEMBLY
Use spring compressor (PN 529 035 524)529 035 524 2
A15D0OA
1Measure thickness of slope base here 2Sliding pulley side 3Slope base
Bushing Replacement
Large Bushing Remove Allen screws if applicableHeat to break Loctite bondInstall support plate included in tool (PN 529 031 100) inside sliding halfPlace extractor (PN 529 035 575) below bushingA15D36B
TYPICAL
Remove half keys no3 and spacer no4 to disassemble the outer cam and the pulley halves