2002 Ski-Doo Shop Manual Volume Three, Page 211Get this manual
Section 05 TRANSMISSION Subsection 03 (DRIVE PULLEY)
Apply retaining compound Loctite 609 outside of bushing then press it down to counterbore from outside endCAUTION: Insert bushing from sliding half side (inner side) of spring cover
21,22,23, Screw, Dowel Tube and Ramp
Insert dowel tube from chamfered sideMake sure ramp is centered on dowel tubeASSEMBLY
NOTE: This drive pulley is lubrication freeDo not lubricate any componentA16D08A
1,2,3, Screw, Ring Gear and Loctite 271
Apply Loctite 271 (PN 413 702 900) on threads and then torque to 27 Nm (20 lbfft)