2002 Ski-Doo Shop Manual Volume Three, Page 205Get this manual
Section 05 TRANSMISSION Subsection 03 (DRIVE PULLEY)
DISASSEMBLY
Unscrew nutRemove tab washerCheck for alignment marks for proper indexing at reassembly
A03D2HA
1Puller tool 2Spring cover tool
A03D2IA
1Alignment marks
Identify blocks no1 and their respective positive positions for reassembly
Screw puller (hand tight) to hold spring cover and remove screws holding spring coverSlowly unscrew puller to release spring pressureRemove spring cover no5, spring and washer no11
CLEANING