2002 Ski-Doo Shop Manual Volume Three, Page 187Get this manual
Section 04 ENGINE Subsection 10 (CARBURETOR AND FUEL PUMP)
NOTE: Left side DPM hose must be routed under heated carburetor coolant inlet hose
A32C30A
1Left side DPM hose 2Heated carburetor coolant inlet hose
Throttle Cable Adjustment
Adjust throttle cable as per following procedure: Loosen throttle cable housing adjusting and locking nutsConnect throttle cable barrel to carburetor cam lever no17While holding throttle lever to wide open throttle position, pull on the throttle cable until cam lever touches the stopper no16In this position, tighten cable housing adjusting and locking nutsAs confirmation, the gap should be in between 0.5 and mm (164 and 132 in)A32C33A