2002 Ski-Doo Shop Manual Volume Three, Page 133Get this manual
Section 04 ENGINE Subsection 03 (493, 593, 693 AND 793 ENGINE TYPES)
Tighten exhaust manifold bolts to 23 Nm (17 lbfft) in criss-cross sequence5 11 12 10
A06C0FA
1No play
A32C18A
TYPICAL
Apply Loctite 243 (PN 293 800 060) on screws threadsInstall outlet socket and tighten screws to 12 Nm (106 Ibfin)Note position of longer screw
Check distance from blade stopper outer edge and distance from center of reed valve block