2002 Ski-Doo Shop Manual Volume Three, Page 59Get this manual
Section 02 LUBRICATION AND MAINTENANCE Subsection 03 (STORAGE)
Proceed as follows: Start the engine and allow it to run at idle speed until the engine reaches its operating temperature
COUNTERSHAFT LUBRICATION
Driven pulley and brake disc must be floating on the countershaft for efficient operationLubricate with anti-seize lubricant (PN 293 550 004)CAUTION: Do not lubricate excessively as lubricant could contact and soil brake pads and or drive belt
WARNING
Ensure the track is free of all particles which could be thrown out while it is rotatingKeep hands, tools, feet and clothing clear of trackEnsure no one is standing in close proximity to the vehicleStop the engineModels with Choke Remove air silencers to spray storage oil into each carburetor boreAll Models Restart engine and run at idle speedInject storage oil until the engine stalls or until sufficient quantity of oil has entered the engine (approximately half can)With the engine stopped, remove the spark plug and spray storage oil (PN 496 014 100) into each cylinderCrank slowly or revolutions to lubricate cylindersReinstall the spark plugs and the outlet primer hose or air silencers