2002 Ski-Doo Shop Manual Volume One, Page 292Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
Simultaneously with the following operation transfer will occur; TrsAt this point, be ready to rev the engine so it won't fall below the 2000 RPM mark when not using 9-volt adaptorPlug-in the desired calibration cartridge (special red key) onto the programmer post, the following screens will appear temporarily:
A00A5YA
1TIMING ADJUST 2ENGINE SERIALAT N
TRANSFERVERIFY
Press MENU twice, following screen will show:
A00A41A
A30E1XA
CHECK KEYS PROGRAM KEY VEHICLE INFO TA RT H
TRANSFER PGMR MPEM
After procedure is completed, ensure engine idle speed with engine hot is 17002100 RPMStop the engine