2002 Ski-Doo Shop Manual Volume One, Page 226Get this manual
Section 05 TRANSMISSION Subsection 05 (PULLEY DISTANCE AND ALIGNMENT)
NOTE: Prior to performing pulley adjustment, loosen torque rod nut to allow engine movementEngine supports have tendency to stick to frame, work engine loose prior to aligningSkandic LT When engine slotted mounting holes do not allow to set proper pulley offset X, adjust with shims (PN 504 108 200) between pulley and countershaft bearing support (pulley pushed toward brake disc)Engine Movement Loosen the bolts retaining engine support to the framePosition engine to obtain the specified alignmentNOTE: After alignment, adjust torque rod so it slightly contacts stopper plateDo not over tighten, it will disalign pulleys1
1Loosen
Engine Movement The engine support has slotted mounting holesMove engine to obtain specified distance between pulleysSkandic WTSWTWT LC Driven Pulley Movement Loosen gearbox retaining screws and move gearbox accordinglyRetighten screwsA06D07A