2001 Ski-Doo Mini Z Factory Shop Manual, Page 117Get this manual
Section 06 ELECTRICAL Subsection 03 (TESTING PROCEDURE)
TESTING PROCEDURE
IGNITION SYSTEM TESTING SEQUENCE
In the case of ignition problems, check the following in the prescribed order until the problem can be solved1Sparkingspark plug condition 2Electrical connectors 3Ignition switches, tether cord cap switch and emergency switch 4Ignition coil resistance
1SPARKING
During this operation, it is important to use the snowmobile spark plug and not new oneBring the plug in contact with the engineIf no spark is produced, replace the spark plug with new one and do the test again
2ELECTRICAL CONNECTOR TESTING
Make sure that none of the connectors are disconnected
LIGHTING SYSTEM TESTING SEQUENCE