2001 Ski-Doo Mini Z Factory Shop Manual, Page 95Get this manual
Section 04 ENGINE Subsection 08 (CARBURETOR)
Slide out carburetor and activate carburetor throttle lever so that groove aligns with governor rod, as shown in the next photo1 2
Carburetor body and jets should be cleaned in carburetor cleaner following manufacturer's instructions
WARNING
Solvent with low flash point such as gasoline, naphtha, benzol, etc should not be used as they are flammable and explosiveCheck for fuel soaked into float no8Replace as necessaryCheck float no9 and float pin no10 for cracks or other damages affecting free movementReplace as necessary
DISASSEMBLY AND ASSEMBLY
11,12, Main Jet and Nozzle
Place carburetor on clean surface, then unscrew main jet no11 using flat screwdriver, as shown in the next photoA31C0SA