2001 Ski-Doo Factory Shop Manual Volume Two, Page 253Get this manual
Section 09 BODYFRAME Subsection 02 (BODY)
WARNING
Before installation, ensure that all cables are in perfect conditionProperly install the cable ends and secure them in placePay attention to route them properly, away from any rotating, moving, heating, or vibrating parts
WARNING
Always ensure that the fuel, vent, primer, impulse, injection oil and rotary valve oil lines are properly fixed to their connectors, that they are not perforated or kinked and that they are properly routed away from any rotating, moving, heating or vibrating partsAlso check for leaksReplace if requiredNOTE: Refer to proper Parts Catalog to find suitable clip part numbers
abrasive cleaners waxes containing an abrasive or cleaning agent in their formulaApply wax on glossy finish onlyProtect the vehicle with cover to prevent dust accumulation during storageCAUTION: If for some reason the snowmobile has to be stored outside it is preferable to cover it with an opaque tarpaulinThis will prevent the sun rays from affecting the plastic components and the vehicle finish