2001 Ski-Doo Factory Shop Manual Volume Two, Page 250Get this manual
Section 09 BODYFRAME Subsection 02 (BODY)
INSTALLATION AND ADJUSTMENT HEADLAMP BEAM AIMING
Beam aiming is correct when center of high beam is 25 mm (1 in) below the headlamp horizontal center line, scribed on test surface, 381 cm (12 ft in) awayMeasure headlamp center distance from groundScribe line at this height on test surface (wall or screen)Light beam center should be 25 mm (1 in) below scribed lineBULB REPLACEMENT
Headlamp
If any headlight bulb is burnt, remove windshield, air filter then, air deflector
A30E04A
1Air deflector
A02E0AA