2001 Ski-Doo Factory Shop Manual Volume Two, Page 235Get this manual
Section 08 STEERINGFRONT SUSPENSION Subsection 02 (STEERING SYSTEM)
WARNING
On Grand Touring SE do not lift vehicle by steering column
DISASSEMBLY AND ASSEMBLY
Grips must be carefully removed to prevent damaging the heating elementsHeat grip with heat gunApply tape to handlebar near the grip to protect paintInject compressed air into the handlebar and twist grip as pulling it outA19H04A
TYPICAL 1Gap in the heating element opposite the wires
Continue cutting along the gap and remove the gripIf required, slowly peel heating element no15 from handlebar and remove itTo install, stick the heating element to the handlebar making sure the wires do not interfere with operation of the accelerator or brake handlePrior to install grips, position heating element protector no14