2001 Ski-Doo Factory Shop Manual Volume Two, Page 213Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
Test to be performed Running insulation Continuity in stop position Insulation in stop position
Wire color BK and BKYL BK and BKYL BKGN and BKWH BKGN and BKWH WH and RD WH and BKRD BK and RD BK and engine WHYL and BLYL GYYL and GNYL WHBL and BK WHBL and BK Spark plug cap and engine BK and engine BK and engine
Multimeter probe connection
Ignition and kill switches
IGNITION SYSTEM TESTING (CK3 SERIES 290 RER) Resistance Voltage Value Multimeter Value Multimeter (Ohms) scale (Volts) scale 6-DB-2-F 00.0 0.L 6-DA-3-F 6-DB-2-F 00.0 00.000.5 6-DA-3-F 6-DA-2-F 6-DA-1-F 6-DA-2-F 6-DA-1-F 6-DB-3-F 6-DB-1-F 6-DB-3-F 6-DB-4-F 6-DB-2-F 6-DB-1-F 6-DB-2-F and engine 6-DC-1-F 6-DC-4-F 6-DC-2-F 6-DC-3-F 0.L 00.000.5 25.056.0 3.58.1 0.L 00.000.5 190300 190300 00.200.5 times 10.519 times 00.0 00.0 00.0 00.0 00.0 00.0 00.0 00.0 00.0 30.050.0 4.010.0 .200.350 .200.350 10.020.0 times 00.0Vac 00.0Vac .000Vac .000Vac 00.0Vac
Note No stop switch must be operationalOnly one stop switch must be operationalTest one at timeTether cord cap should be offTether cord cap should be in place The term "engine" refers to the engine metal parts connected to the magneto housing No switch must be operational and tether cord cap must be in place