2001 Ski-Doo Factory Shop Manual Volume Two, Page 205Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
Vehicle information is transferred from MPEM to programmer
And then following screen showing the actual calibration number in the MPEM
TRANSFER PGMR MPEM
C AT XXX XXX XXX MODIFY? YES NO
A30E2JA
A30E1YA
NOTE: In fact the programmer takes copy of all vehicle parameters scribed in MPEMThis copy will be modified within the programmer then transferred to the MPEMSelect no4ENGINE PARAMETER
A30E1ZA
CUSTOMER NAME AT VEHSERIAL# PA M
Check for proper calibration numberSee table belowSelect NO and press ENTERPress MENU twice then turn off programmer, unplug it from MPEMRemove bypass wire or 9-volt adaptorStop engine when using With Engine Running procedureMach STD CALIBRATION PROGRAM NUMBER (SOFTWARE) MPEM NP (HARDWARE) CALIBRATED MPEM NP (HARDWARE AND SOFTWARE) MODEL Mach TECH PLUS Grand Touring SE