2001 Ski-Doo Factory Shop Manual Volume Two, Page 172Get this manual
Section 05 TRANSMISSION Subsection 05 (PULLEY DISTANCE AND ALIGNMENT)
PULLEY ALIGNMENT AND DISTANCE SPECIFICATIONS CHART
PULLEY DISTANCE MODELS 0.50 mm.020 in) Mach STDTECH PLUS Grand Touring SE 121.0 (4.764) 121.0 (4.764) 0.50 mm.020 in) 35.5 (1.398) 35.5 (1.398) OFFSET Y-X 0.5 mm.020 in) 1.5 (.060) 1.0 (.039)
Pulley Distance Adjustment Method
Engine Movement The engine support has slotted mounting holesMove engine to obtain specified distance between pulleys
Pulley Alignment Method
Engine Movement Loosen the bolts retaining engine support to the framePosition engine to obtain the specified alignmentNOTE: After alignment, adjust torque rod so it slightly contacts stopper plateDo not over tighten, it will disalign pulleys1