2001 Ski-Doo Factory Shop Manual Volume Two, Page 118Get this manual
Section 04 ENGINE Subsection 03 (LEAK TEST AND ENGINE DIMENSION MEASUREMENT)
CONNECTING ROD BIG END AXIAL PLAYENGINE TYPE 809 NEW PARTS min max0.310.68 (.012.027 in) WEAR LIMIT 1.20 mm (.047 in)
A01C0RC
Using feeler gauge, measure distance between thrust washer and crankshaft counterweightIf the distance exceeds specified tolerance, repair or replace the crankshaft
TYPICAL 1Measure at mid point between the key and the first thread 2Mid point of crankshaft bearing ASee table below
Crankshaft Deflection on PTO Side
ENGINE DISTANCE MAXIMUM ON PTO SIDE TYPE mm (in) mm (in) 809 94.4 (3.717) 0.06 (.0024)