2001 Ski-Doo Factory Shop Manual Volume Three, Page 219Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
Voltages obtained upon starting are proportional to the force applied onto the manual starterA low voltage is therefore normal under low cranking forcePerform testing in the prescribed order and replace any parts not performing according to specificationsIt is important to resume all tests when replacing componentIf not specified, the probe connecting sequence is not importantLIGHTING SYSTEM TESTING (ZX SERIES 290 W) PART TEST TO BE PERFORMED Output Lighting generator coil Coil insulation Ground continuity WIRE COLOR YL and YL YL and engine BK and engine MULTIMETER PROBE CONNECTION 2-MO-B-F and 2-MO-C-F 2-MO-(B,C)-F and engine 2-MO-A-F and engine RESISTANCE VALUE (OHMS) 00.100.4 0.L 00.000.5 MULTIMETER SCALE 00.0 00.0 00.0 VOLTAGE VALUE (VOLTS) 0.52.0 MULTIMETER SCALE 00.0Vac NOTE