2001 Ski-Doo Factory Shop Manual Volume Three, Page 212Get this manual

2001 Ski-Doo Factory Shop Manual Volume Three, Page 212

Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
Vehicle information is transferred from MPEM to programmer
And then following screen showing the actual calibration number in the MPEM
TRANSFER PGMR MPEM

C AT XXX XXX XXX MODIFY? YES NO
A30E2JA

A30E1YA

NOTE: In fact the programmer takes copy of all vehicle parameters scribed in MPEMThis copy will be modified within the programmer then transferred to the MPEMSelect no4ENGINE PARAMETER
Check for proper calibration numberSee table belowSelect NO and press ENTERPress MENU twice; Trs then turn off programmer, unplug it from MPEMRemove 9-volt adaptorStop engine when using With Engine Running procedureMODEL Grand Touring 500 Formula DLX 500 MX 500 STDTRAIL Grand Touring 600 MX 600 STDTRAIL Formula DLX 600 MX 600 ADRENALINEX Summit 600 Formula DLX 600 GSE MX 700 STDTRAIL Grand Touring 700 GS Formula DLX 700 GSGSE MX 700 ADRENALINEX Summit 700 STDXH.MH.M MX 800 STD MX 800 ADRENALINEX CALIBRATED MPEM PN CALIBRATION PROGRAM MPEM PN (HARDWARE NUMBER (HARDWARE) AND SOFTWARE) (SOFTWARE) 515 175 380 512 059 300 512 059 298 512 059 296 512 059 298 512 059 383 512 059 385 512 059 137 512 059 299 512 059 299 512 059 297 512 059 299 512 059 384 512 059 384 512 059 201 512 059 201 512 059 202 512 059 353 512 059 202 512 059 201 512 059 202