2001 Ski-Doo Factory Shop Manual Volume Three, Page 144Get this manual
Section 04 ENGINE Subsection 08 (CARBURETOR AND FUEL PUMP)
CAUTION: The rubber flange must be checked for cracks andor damageAt assembly, the flange must be perfectly matched with the air intake manifold or severe engine damage will occurInstall clamps in way that their tightening bolts are staggered not aligned
Check that with the throttle lever fully depressed, there is free play between the carburetor cover and top of throttle slide2 3
Throttle Cable Adjustment WARNING
Ensure the engine is turned OFF, prior to performing the throttle cable adjustmentCarburetors must be installed on engine and throttle cable properly routedFor maximum performance, correct cable adjustment is criticalAt full opening throttle slide must be flush or 1.0 mm (.040 in) lower than the top of carburetor outlet bore (engine side)Use mirror and look through air silencerFirst loosen adjuster nut then turn throttle cable adjuster accordinglyA00C3FA