2001 Ski-Doo Factory Shop Manual Volume One, Page 319Get this manual
Section 09 BODYFRAME Subsection 03 (FRAME)
FRAME CLEANING
NOTE: For aluminum frames use only aluminum cleaner and follow instructions on container(Dursol cleaner or equivalent)Clean frame and tunnel with appropriate cleaners and rinse with high pressure hoseTouch up all metal spots where paint has been scratched offSpray all bare metal parts of vehicle with metal protector0
Seat Cleaning
For all models, it is recommended to clean the seat with solution of warm soapy water, using soft clean clothCAUTION: Avoid use of harsh detergents such as strong soaps, degreasing solvents, abrasive cleaners, paint thinners, etcthat may cause damage to the seat cover
A03C18B
FRAME WELDING
Steel Frame: electric welding amperage: 70-110 voltage: 20-24 electrode: E-7014 (332 in)Aluminum Frame (refer to specialized welding shop): electric welding: inert gas (argon) rod: ER-4043 (332 in)CAUTION: Before performing electrical welding anywhere on the vehicle, unplug the multiple connector at the electronic boxOn models equipped with battery, also unplug the negative cableThis will protect the electronic box and battery against damage caused by flowing current when welding