2001 Ski-Doo Factory Shop Manual Volume One, Page 317Get this manual
Section 09 BODYFRAME Subsection 02 (BODY)
MATERIAL REPAIR PROCEDURE
R.I.MUrethane
R.I.Murethane is light colored (tan) on the inside with smooth surface
WARNING
Material should be repaired and repainted in well-ventilated area onlyCAUTION: Clean R.I.Mwith isopropyl alcohol or Crest Hi-Solv productNever use cleaners or products that contain chlorineCAUTION: R.I.Mshould never be exposed to temperatures exceeding 93C (200F)NOTE: When working on R.I.Msurface, never use grinder or high revolution tool such as an air or electric bufferUse of such tools could overheat material and liberate agents in it thus causing bad adhesion
Sand the surface using smooth dry sand paperUse the same product if final finish is requiredClean surface with Crest Hi-Solv productApply flexible primer such as Crest Prima Flex stock noAP-F Wait 10 minutes Repaint (air dry during 72 hours (approximately))