2001 Ski-Doo Factory Shop Manual Volume One, Page 209Get this manual
Section 05 TRANSMISSION Subsection 06 (BRAKE)
Add the thin spacer to complete bearing removal
INSPECTION
7, Brake Pad
Models with Mechanical Brake Brake pads must be replaced when fixed pad projects only mm (132 in) from caliperCAUTION: Brake pads must always be replaced in pairsA03D31A
1Thin spacer 2Medium thickness spacer
DISASSEMBLY
7,15,16,23, Brake Pad, Brake Lever, Pin and Screw
All Models with Mechanical Brake Pull pin out of caliper and remove leverFixed pad is riveted to chaincase on these modelsCaliper must be split to remove moving padTo removed fixed pad, drill out its rivet then pry disc in order to free fixed padAll Models with Hydraulic Brake Only brake pads are available as spare partsIf caliper or master cylinder are damaged, replace each of them as an assembly2 A