2001 Ski-Doo Factory Shop Manual Volume One, Page 193Get this manual
Section 05 TRANSMISSION Subsection 03 (DRIVE PULLEY)
ASSEMBLY
NOTE: This drive pulley is lubrication freeDo not lubricate any component
Position dowel tube split at the illustrated angle30 5
1,2,3, Screw, Ring Gear and Loctite 271
Apply Loctite 271 (PN 413 702 900) on threads and then torque to 27 Nm (20 lbfft)
26,27,28, Calibration Screw, Washer and Locking Nut
When installing calibration screw, make sure to install washer as shown.A16D2PA
A16D07A
1Washer
Torque locking nut to 10 Nm (89 lbfin)
A16D09A