2001 Ski-Doo Factory Shop Manual Volume One, Page 180Get this manual
Section 05 TRANSMISSION Subsection 02 (DRIVE BELT)
To obtain maximum vehicle performance, the belt tension must be adjusted according to specifications shown in the accompanying chartMODEL All models
Or use the belt tension tester (PN 414 348 200)1 2
DEFLECTION mm (in) 32 (1-14 1364)
FORCE kg (lb) 11.3 (25)
HEIGHT OVER DRIVEN PULLEY1.5 mm (0116 in)
A00C07B
FOR REFERENCE ONLY
Lower O-ring Upper O-ring Force (read down) Deflection (read up)
To Check Tension Position reference rule on drive beltWooden Stick and Spring Scale Method
1Slide lower O-ring of tester to specified deflection2Slide upper O-ring of tester until reaching mark (zero)3Apply pressure until lower O-ring is flush with edge of rule and read force on the upper scale at top edge of O-ring2