2001 Ski-Doo Factory Shop Manual Volume One, Page 179Get this manual
Section 05 TRANSMISSION Subsection 02 (DRIVE BELT)
DRIVE BELT
MODEL S-Series Skandic LTWTSWTWT LC PART NUMBER 415 060 600 WIDTH (NEW) 0.25 mm (.010 in) 34.70 mm (1.366 in) MINIMUM WIDTH (WEAR LIMIT)
32.30 mm (1.272 in)
INSPECTION
Inspect belt for cracks, fraying or abnormal wear (uneven wear, wear on one side, missing cogs, cracked fabric)If abnormal wear is noted, probable cause could be pulley misalignment, excessive RPM with frozen track, fast starts without warmup period, burred or rusty sheave, oil on belt or distorted spare beltCheck the drive belt widthReplace the drive belt if width is less than the minimum width recommended (see table above)
ROTATION DIRECTION
The maximum drive belt life span is obtained when the drive belt is installed as shownThis will ensure that correct direction of rotation is respectedA01D2LA