2001 Ski-Doo Factory Shop Manual Volume One, Page 171Get this manual
Section 04 ENGINE Subsection 10 (CARBURETOR AND FUEL PUMP)
Final idle speed adjustment (engine running at idle speed) should be within 12 turn of idle speed screw from preliminary adjustmentMODELS Skandic LTWTSWTWT LC, Formula DLX FAN 500, Touring FAN 500 MX FAN 440500 Summit FAN 500 Touring FAN 380 Formula DLX FAN 380 MX FAN 380 THROTTLE SLIDE HEIGHT mm (in)
However, pay attention to the following: On applicable models, make sure to align tab of carburetor and air intake silencer (if applicable) with notch of adaptor(s)On applicable models, install adaptor with UP mark facing upCAUTION: The rubber flange must be checked for cracks andor damageAt assembly, the flange must be perfectly matched with the air intake manifold or severe engine damage will occurInstall clamps in way that their tightening bolts are staggered not aligned
Throttle Cable Adjustment WARNING