2001 Ski-Doo Factory Shop Manual Volume One, Page 149Get this manual
Section 04 ENGINE Subsection 06 (OIL INJECTION SYSTEM)
ASSEMBLY
1, Spring Clip
Always check for spring clips tightness6, Oil Pump Gear
At gear assembly, apply light coat of Molykote 111 (PN 413 707 000) on gear teeth
7, Needle Roller (fan cooled engine only)
The needle roller must be engaged as deep as possible in the pump mounting flangeA13C0PA
Torque to Nm (44 lbfin)Cable plastic elbow must be fastened and fully insertedMake sure cable barrel is well seated in oil pump leverSecure barrel with plastic washer and circlipInstall cable lock washer on lever sideVerify cable and oil pump lever operation