2001 Ski-Doo Factory Shop Manual Volume One, Page 123Get this manual
Section 04 ENGINE Subsection 03 (593 ENGINE TYPE)
Install outlet socket and tighten screws to 12 Nm (106 Ibfin)Note position of longer screw
A01C02B
A32C19A
TYPICAL 1Circlip break
CAUTION: Circlips must not move freely after installation; if so, replace themCoat both sides of new cylinder gasket with Loctite 518 then, install it on crankcaseLoosely install cylindersInstall exhaust manifold then, tighten cylinder retaining screws to 29 Nm (21 lbfft) in criss-cross sequenceAt assembly, torque cylinder head screws to 29 Nm (21 Ibfft) in the following illustrated sequence5 11 12 10