1999 Ski-Doo Factory Shop Manual Volume Two, Page 346Get this manual

1999 Ski-Doo Factory Shop Manual Volume Two, Page 346

Section 08 STEERINGFRONT SUSPENSION Subsection 02 (STEERING SYSTEM)
STEERING ADJUSTMENT (SKIS)
Definitions
TOE-OUT: difference measured between the front edge of the skis and rear edge as viewed from the topIt is adjustable
13,14,15,22, Jam Nut, Tie Rod and Pivot Arm
With handlebar in straight-ahead position, the center of the pivot arm must be in line with the end of the boltLoosen the jam nuts on tie rod no14 (LH threads on steering column end) and turn tie rod accordinglyAlign and retighten the jam nuts to 18 Nm (159 lbfin)A 1

WARNING

Never lengthen tie rod making threaded portion of ball joint exceed 20 mm (2532 in)
A01G04A

CAMBER: specific inward or outward tilt angle of ski leg compared to vertical line when viewing the vehicle from frontThis angle is adjustable on some models only