1999 Ski-Doo Factory Shop Manual Volume Two, Page 333Get this manual
Section 07 REAR SUSPENSION Subsection 05 (DRIVE AXLE)
The bearing on the splined side of axle must be pushed until it is seated on shaft shoulderThe end bearing housing bearing must be flush with end of drive axleEach bearing must have its shield facing the sprocket1 A
A00F0GA
A00F05A
SIDE VIEW 1Bearing 2Seal 3Housing 4Seal lip A2 mm approx
1Bearing shield on this side 2Flush with drive axle 3Seated on shaft shoulder