1999 Ski-Doo Factory Shop Manual Volume Two, Page 219Get this manual
Section 05 TRANSMISSION Subsection 04 (DRIVEN PULLEY)
Install Allen screws no18 and washers supplied with the new bushingSmall Bushing NOTE: Following procedure can be done with press using the same toolsInstall puller in viseHeat bushing areaTurn puller handle and sliding half at once to extract the bushing
ASSEMBLY
4, Cam Slider Shoe
When replacing slider shoes, always install new set (3 shoes) to maintain equal pressure on the camAssemble driven pulley components by reversing the disassembly procedure
All Models
Coat cam interior with anti-seize lubricant
INSTALLATION
529 031 300
14,15, Countershaft and Anti-seize Lubricant