1999 Ski-Doo Factory Shop Manual Volume Three, Page 249Get this manual
Section 07 REAR SUSPENSION Subsection 03 (DRIVE AXLE)
CK3 SeriesA00F0AA
1Plane surface A1.5 mm (116 in) MAXIMUM
CAUTION
A06D1XC
Measure from end of drive axle 49 mm (1.929 in) 151.2 mm (4.724 in) 274.2 mm (10.795 in) 376.3 mm (14.815 in)
The same sprocket must not be pressed twice on the axleIf synchronization is found to be defective, use new sprocket