1999 Ski-Doo Factory Shop Manual Volume Three, Page 228Get this manual
Section 06 ELECTRICAL Subsection 06 (TESTING PROCEDURE)
6Compare readings with those appearing in the IGNITION table
8MPEM SUPPLY VOLTAGE TESTING
Grand Touring 700SE Only 1Disconnect the 6-15 and 6-13 housings between module and main harness2Connect multimeter probes to REDBLUE and BLACK wires coming out from harnessPlacethe selector switch to and the scale to 00.0VDC3Activate the manual starter and check values indicated by the multimeter4Repeat operation times
A30E0QA
13-01 housing
5Compare readings with those appearing in the IGNITION table